Welcome to the Shop

We are specialized in racing parts and rare parts for Fiat, Fiat 500 /600, Abarth , Abarth 1000 TC / R Fiat 850 / OT , Autobianchi, Lancia Thema 8.32 and others. We are experienced in mountain racing and circuit racing and would like to help you. 

NEWS: 

22.08.2013

I am pleased to announce the the new "hard-chrome" rocker shafts to complement the newly introduced, bronze bushed rocker arms, are now in stock and available for immediate delivery.

The shafts are made from 1/4 inch wall, 4130 seamless tubing. Each unit is ground to "near net size", then hard-chrome plated, and finally centerless ground to its final dimension. This provides a ductile shaft (Rc 35) with a very hard outside shell (Rc72) for excellent wear characteristics. In addition, the final ground surface of the shaft has a very smooth and consistent finish, yet will hold oil for excellent lubrication qualities. Each shaft comes with removable end caps which can be removed for inspection and cleaning.

The new design shaft uses an improved oil delivery mechanism whereby oil is delivered directly to the bottom of the shaft, where the highest boundary interface loading takes place during valve actuation. Each rocker is fed by a single orifice, and the orifice has an additional "X" groove to assist in distributing the oil over the width of the internal bore of the rocker arm.

The shaft has been manufactured to standard factory size tolerances to ensure that it can be used with standard steel Fiat rocker arms, Scuderia Topolino bronze bushed, standard rocker arms or Scuderia Topolino, hard anodized, aluminum roller tip rocker arms.

While the full benefit of this shaft will only come to light with more aggressive camshafts, with attendant higher valve lift and spring pressures, even less aggressive engine combinations can benefit from the reduced parasitic friction of this new shaft, particularly if rocker arms with bronze bushes. or roller tipped rocker arms, are employed.

24.05.2013 

No more torn drive shafts at Fiat 600 and Fiat 850 ! 
Now as a set : 1 pair of drive shafts with universal joints as in Fiat Abarth 1000TC 1 series installed.                       
 For 16mm ( Fiat 600 differential ) or 18mm ( 1000TC lock or Fiat 850) sliding blocks available .                        
Special offer : 580, - EUR / set incl. 

13.05.2013 

Inboard video Ransel - classical in the Fiat Abarth 1000TC : 
Distance: 5 km - Hours: 3:00:41 - Maximum speed: 160 km / h
 
We were represented by 3 - Abarth cars. Very nice event , great organization and a great route. We'll be back ;-). Thank you also to Mr. Wacket and the whole team. 

 


500-007

Product no.: 500-007

550.00 € / set(s) *
In stock
can be shipped within 6 days

Fulviafelge1

Product no.: Fulviafelge1

775.00 € / set(s) *
In stock
can be shipped within 2 days

E-600-07

Product no.: E-600-07

27.00 € *
In stock
can be shipped within 6 days

1000-02

Product no.: 1000-02

112.00 € / pair(s) *
1 piece(s) = 56.00 €

112-03

Product no.: 112-03

85.00 € *
In stock
can be shipped within 2 days

ASA1

Product no.: ASA1

56.00 € *
In stock
can be shipped within 3 days

ASA3

Product no.: ASA3

8.20 € *
In stock
can be shipped within 1 days

contactless ignition distributor,A 112,Abarth,600-850

Product no.: 112-DS001

New contactless ignition distributor for all Fiat and Abarth Models,600-850,850-1000TC and Fiat 127-A 112.

Need´s the A 112 Coilpack with blackbox ( 15-05)

198.00 € *
In stock
can be shipped within 1 days

Motorsport distributor contactless,A 112 Abarth

Product no.: 112-DS002

Motorsport distributor contactless by the standard A 112 Hal-pointer.Modified ignition curve for high compression engines

Needs the coilpack 15-05.

208.00 € *
In stock
can be shipped within 1 days

500-035 GARA

Product no.: 500-035 GARA

245.00 € *
In stock
can be shipped within 1 days

Abarth Sticker 30x24cm

Product no.: ASA12

Abarth Sticker 30x24cm

22.00 € *
In stock
can be shipped within 2 days

Throttle lever Bialbero,TCR/OTR

Product no.: 02-350

Throttle lever Bialbero,TCR/OTR

52.00 € *
In stock
can be shipped within 2 days
*
Prices incl. 19 % VAT, plus delivery