Product no.: 01-95-8
Set of eight Double valve springs A112 Abarth standard |
76.00 €
/ set(s)
*
In stock |
|
Product no.: 02-14
Mainbearings A112 Abarth Standard,3-lays |
125.00 €
*
In stock |
|
Product no.: 09-01
2016 Version of the Connecting Rod Scuderiatopolino 110mm,super H-beam. For high performance engines, the super H rods are 5% less in weight than the standard H conrods. The small pin end has now a groove to increase the lubriation . For Fiat 600-850/A112,18mm bush for Piston pin. With ARP 2000 rod bolts. Maybe the block needs modification at the bottom of cylinder. |
435.00 €
/ kit(s)
*
In stock |
|
Product no.: 06-16
velocity stack with mesh Weber 30DIC |
95.00 €
*
In stock |
|
Product no.: 02-152
Engine Gasket set Fiat 850, 843cc, 34,37 and 47HP. Fullset with oil seals and valve stem seals. |
72.50 €
/ set(s)
*
In stock |
|
Product no.: 02-73
Oilplug 14mm diameter, all engines |
3.50 €
*
In stock |
|
Product no.: 08-20-10
Slipper race pistons, dome with valve cuts, 68,00mm diameter.Forged, small piston rings to reduce parasitic friction, 30,80mm compression height , 18mm floated pin, the small end of conrod must be machined |
935.00 €
/ set(s)
*
In stock |
|
Product no.: 600-100
reinforced head gasket with separate firerings for piston diam. 65-66,00mm. 1,6mm thickness |
208.00 €
*
In stock |
|
Product no.: 01-05-003
PBS 8 port cylinderhead with 5mm valvetrain, fullset,standard porting |
3,050.00 €
*
Currently unavailable |
|
Product no.: 02-60
oil breather for the front timing cover,Abarth |
215.00 €
*
In stock |
|
Product no.: 02-153
Engine gasket set Fiat 850 Sport, 903cc, 52HP, Spider,Coupé,Special |
72.50 €
/ set(s)
*
In stock |
|
Product no.: 09-03
Set of four Connecting Rods Scuderiatopolino 110mm,super H-beam.Center to center lenght 112mm , for 903 and 965cc engines. If you use 18mm floated pin. For high performance engines, the super H rods are 5% less in weight than the standard H conrods. The small pin end has now a groove to increase the lubrication . For Fiat 600-850/A112,18mm bush for Piston pin. With ARP 2000 rod bolts. Maybe the block needs modification at the bottom of cylinder. |
466.77 €
/ kit(s)
*
In stock |
|
Product no.: 08-20-12
Slipper race pistons, dome with valve cuts, 68,20mm diameter.Forged, small piston rings to reduce parasitic friction, 30,80mm compression height , 18mm floated pin, the small end of conrod must be machined |
935.00 €
/ set(s)
*
In stock |
|
Product no.: 06-14
Intake manifold for weber 32-34 DMTR,A112 Abarth 58HP and 70HP.Will fiat 850,127 and A112 cylinderheads. |
93.00 €
*
In stock |
|
Product no.: 01-05-004
PBS Gen 4 cylinderhead, fully ported with 7mm valvetrain, fullset. Comes with valves, springs, retainers ,intake and valvecover,gaskets for intake and valve cover. |
3,450.00 €
*
Currently unavailable |
|
Product no.: 02-77
valve cover gasket Autobianchi/Lancia A112 Abarth with integrated intake manifold |
6.50 €
*
In stock |
|
Product no.: 02-72
Oilplug 10mm diameter, all engines |
3.00 €
*
In stock |
|
Product no.: 01-05-006
PBS 8 port cylinderhead, fullrace with 5mm valvetrain, fullset |
3,650.00 €
*
Currently unavailable |
|
Product no.: 02-78
Valve cover Gasket A112 Abarth,1000TC/OT. With large intake manifold. |
6.50 €
*
In stock |
|
Product no.: 02-61
Crankcase breather Fiat 127/A112-Abarth |
78.00 €
*
In stock |
|
Product no.: 02-74-8
Crankshaft with 8 counterweights,74mm stroke, A112 Abarth. Runs really smooth at high rpm and saves the life of the block. |
2,950.00 €
*
Currently unavailable |
|
Product no.: 02-74
Plug for camshaft brg.clutch side, 42mm, all pushrod engines |
5.50 €
*
In stock |
|
Product no.: 600-142
Aluminium valve cover with ABARTH letters. Large Oilhorn.Can be used also on A112 engines with high lift cams. |
169.27 €
*
Currently unavailable |
|
Product no.: 02-82
Oilfilter KS Kolbenschmidt Germany A112 Abarth |
11.80 €
*
In stock |
|
Product no.: 01-41-1
Fullset, ready for fit,aluminium roller rockers with hard chromed rocker shaft and rocker arm spacers.
|
495.00 €
/ set(s)
*
In stock |
|
Product no.: 01-01-11
Head Gasket Abarth 1000TCR, for original TCR heads, on AH or A1 Block. 5 lays composite, Inox rings, 1,6mm racing gasket |
119.00 €
*
In stock |
|
Product no.: 01-01-12
Exhaust Manifold Gasket 1000TCR. Reinforced racing gasket |
43.00 €
*
In stock |
|
Product no.: 06-11-1
Intake manifold Fiat 850-A112,weber 40DCOE. Like 06-11, but 30mm enlarged for more torque at low speed |
196.00 €
*
In stock |
|
Product no.: 02-30-2
conrod bearings, A112 Abarth. 127-850, .020" oversize |
39.50 €
/ set(s)
*
In stock |
|
151 - 180 of 191 results |
|